- This material is made with shaped chunks of coloured glitter cast in clear acrylic.
- Manufactured in the USA.
- Creates a deep and sparkly appearance that is similar front and back.
- The glitter density varies vastly from sheet-to-sheet; sometimes it is very dense, other times it can be sparse and have larger clear spots.
- Maximum usable area: 595mm x 295mm.
- Maximum sheet size: Approx. 600mm x 300mm.
- Thickness: 3mm - 4mm (typically 3.2mm, but does vary).
- Finish: Double sided. Gloss on both sides.
These traits are typical of this material (and not something we consider a fault). Here we try to share with you everything we know about this material; we'd like to empower you with this information so that you may embrace it, and design within the scope of the manufacturer features.
Good to Know
- The glitter density varies vastly from sheet-to-sheet; sometimes it is very dense, other times it can be sparse and have larger clear spots. If this causes you discomfort (such as you don't want to risk seeing glue piece through the material), Shards Acrylic can be a really good alternative option.
- It's common for the surface to have imperfections called 'pits'. They're typically only visible when the finish of the material is captured in the light. It can look like a small indent in the gloss finish.
- This material is described as 'double sided', in that the front and back should be the same. However, we often choose a 'front' and 'back' for each material sheet based on which side looks best (less imperfections, more glitter density).
- The thickness can vary. It's ordered as '3mm', but it typically measures 3.2mm actual. It's not uncommon for the 'denser' mixes (like Kaleidoscope) to be up to 4mm.
- Air bubbles can be within and on the surface, which means some edges or surfaces may have bubble holes and/or be not completely smooth on the surface.
- Ideal for plain (no engraving), simple shapes where the design emphasises the material e.g. circles, hearts, droplets.
- Ideal for hanging pieces so that any clear spots don't create visible glue issues.
- Can look stunning when used in combination with solid acrylic as a 'highlight' in multi-piece designs.
- We've seen some really stunning applications where this material was used layered between other colours (so the edge was used as the 'front').
- Cuts well and leaves a clean, smooth edge line that typically shows the glitter core colour on the sides.
- Engraves well and can hold fine details (engraved areas typically have a frosted white appearance). Engraving looks most effective on darker colours (so that it will show contrast), or when used for paint filling.
- Comes with a protective tape coating that will need to be peeled off.
- It is difficult to capture colour correctly; allow for slight variation from monitor to reality.
Other Chunky Glitter Colours
Want to see it in real life?