- These materials are solid opaque coloured sheets of acrylic.
- The colour is the same on the front, the back and the sides.
- Consistent and reliable colours and finishes.
- Different colours come from different suppliers, so manufacture location and prices may vary.
- Maximum usable area: 595mm x 295mm.
- Maximum sheet size: Approx. 600mm x 300mm.
- Thickness: 3mm (± 10%). Black Solid is also available in 2mm, 4.5mm and 6mm. White Solid is also available in 2mm.
- Finish: High gloss on the front/top and on the back/bottom. Matt Black Solid and Matt White Solid have a matt top/front, high gloss top/bottom.
Good to Know
These traits are typical of this material (and not something we consider a fault). Here we try to share with you everything we know about this material; we'd like to empower you with this information so that you may embrace it, and design within the scope of the manufacturer features.
- Most solid acrylic colours have brown protective tape on them (some other materials have white protective tape). This brown tape adheres really well to the acrylic, making it slightly more difficult to peel. The benefit here is that solid acrylic is ideal for paint filling because the paint is less likely to bleed under the tape!
- Where there is a high gloss finish, any marks/fluff/scratches/etc can show up quite easily on finished products. Our advice is to peel your pieces as late in the process as you can (such as do all your gluing and assembly that you can with the protective tape still on) and as late as you can, peel the tape, clean the pieces with a gentle microfiber cloth and seal them in something like a cellophane bag.
- The thickness of most acrylic types can vary, so creating 3D interlocking designs that fit snug together may be challenging.
- Black Solid and White Solid are ideal for prototyping, as they are low cost and readily available.
- Black Solid in 2mm and White Solid in 2mm are ideal for backing layers for multi-layer pieces to reduce overall weight.
- Most solid colours typically come with a brown protective tape, which adheres quite strongly to the material. Because of this, solid can be ideal for using when applying a paint fill technique.
- Cuts well and leaves a clean, smooth edge line that typically shows the core colour on the sides.
- Engraves well and can hold fine details (engraved areas typically have a frosted white appearance). Engraving looks most effective on darker colours (so that it will show contrast), or when used for paint filling.
- Comes with a protective tape coating that will need to be peeled off.
- It is difficult to capture colour correctly; allow for slight variation from monitor to reality.