- Simple, plain MDF.
- Ideal if you intend to paint the finished piece.
- Has a smooth matte finish that is the same on both sides.
- Maximum usable area: 595mm x 295mm.
- Maximum sheet size: Approx. 600mm x 300mm.
- Price Range: $ Low.
- Thickness: 3mm, 6mm (± 10%).
- Finish: Natural, smooth finish that is consistent on both sides.
[ngg src="galleries" ids="48" display="basic_thumbnail"]
Gallery of MDF
These traits are typical of this material (and not something we consider a fault). Here we try to share with you everything we know about this material; we'd like to empower you with this information so that you may embrace it, and design within the scope of the manufacturer features.
Good to Know
Black Edges on 6mmDue to the power needed to cut through the 6mm thickness, the edges of this material tend to go black/ very dark brown. There can be a small amount of black transfer if you rub the edges as well.
- Great for prototyping as it is very low cost.
- Provides a smooth surface ideal for working on with paint and other mediums e.g. Resin Coating.
- Cuts well and leaves a clean, smooth edge line that typically shows a dark edge due to the high resin content.
- Is cut without protective tape, which means smoke marks will show.
- Engraves well but doesn't show a high contrast between engraved and not engraved areas.
- It is difficult to capture colour correctly; allow for slight variation from monitor to reality.
- Thickness can vary by up to 10% as a result of the manufacturing process, so creating interlocking designs can be difficult.